Q. Wireless Camera shows “IPC disconnected”, “No video source”, “Connection failed”

*Check Original Page: Wireless Camera shows “IPC disconnected”, “No video source”, “Connection failed”

*Please make sure the wireless camera and NVR are within the valid signal range. Do not install the camera too far from the NVR, otherwise the camera will “Connection failed” or “IPC disconnected” .

*Checking the power adapter and antenna, use another working power adapter and antenna for this camera and check whether it will work normally or not.

*Use your finger cover the camera sensor or place the camera in a dark environment to check whether the Infrared lights will turn on or whether you can hear a click sound. If not, please restore the camera to factory settings and try again.

*Match Code the camera again CLICK HERE