*Check Original Page: How to upgrade the Wireless Camera System?

Online Upgrade

1. Please make sure your camera system is connected to the network, and the Network Status is “Healthy Network”.

2. Right click—System setup—System Admin—System upgrade, choose “Online upgrade” and enable “Upgrade when finish download”–click “Start”. And then the system will automatically upgrade.

Offline Upgrade

a). Please download the camera system upgrade firmware and then copy the upgrade firmware to your USB drive. Download Here
(Note: Please put the upgrade firmware directly into the USB, do not put it in the USB folder. Also the USB system format must be FAT32 format and 2.0 interface)

b). Plug the USB drive into the NVR’s USB interface.

c). Right-click on the main menu, select “System setup–>System Admin–>System upgrade–>USB storage–>System”, enable the “Auto restart after the upgrade” then click “Start”. The upgrade process will take about 2-5 minutes and after the upgraded successful, the system will auto reboot.