< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=469272360363438&ev=PageView&noscript=1" />

Q. How to Match Code the “Wireless Camera that have network port” to NVR?

*Check Original Page: How to Match Code the Wireless Camera that have network port to NVR? If your camera has a network port, please follow the steps below to match code the camera. Please refer to below picture to connect the camera to the NVR. Install antennas for cameras and take it close to the

Q. How to Match Code the “Wireless Camera that have network port” to NVR?2020-07-28T07:53:10+00:00

Q. How to upgrade the Wireless Camera System? (For S/W version:3.0.3.0)

*Check Original Page: How to upgrade the Wireless Camera System? (For S/W version:3.0.3.0) a). Please download the camera system upgrade firmware and then copy the upgrade firmware to your USB drive. Download Below W-NVR_K8204-W_3_0_7_0_9013160200 (For 4CH) Download Here W-NVR_K8208-W_3_0_7_0_9013160200 (For 8CH) Download Here (Note: Please put the upgrade firmware directly into the USB, do not

Q. How to upgrade the Wireless Camera System? (For S/W version:3.0.3.0)2020-07-04T06:12:07+00:00

Q. How to install a hard disk drive on NVR?

*Check Original Page: How to install a hard disk drive on NVR? There are several requirements of hard disk drive (HDD) 1. The disk had better be the one used for survilliance, not for computer use. 2. The type should be SATA. SATA2(3GB/s) or SATA3(6GB/s)is recommened. If you connect a USB stick or drive to USB port

Q. How to install a hard disk drive on NVR?2020-03-26T08:35:53+00:00

Q. Viewing Wireless Camera System on Computer by IE

*Check Original Page: Viewing Wireless Camera System on Computer by IE You can view camera on computer or Laptop by IE in locate or remotely. Step1. Open IE browser on your computer or Laptop, go to "www.dvr163.com". (If you don't have IE browser, please download it first) Step2. Choose English first, Click User name login→

Q. Viewing Wireless Camera System on Computer by IE2020-03-26T08:30:57+00:00

Q. No Video Output on the Monitor/TV from Wireless Camera System

*Check Original Page: No Video Output on the Monitor/TV from Wireless Camera System If there’s no video output on the monitor from camera system, there are several possible causes for the problem, you can refer to the following solution: 1. The video output resolution of the camera system is not supported with the monitor/TV *Please

Q. No Video Output on the Monitor/TV from Wireless Camera System2020-04-30T02:52:48+00:00

Q. What should I do if I forget Wireless Camera System password?

*Check Original Page: What should I do if I forget Wireless Camera System password? Our Wireless Camera System's NVR default user name is admin, and default password is no password (means you do not have to input anything). 1. If you forgot the new password created by yourself or the default password could't work, please follow below video link to change

Q. What should I do if I forget Wireless Camera System password?2020-03-26T08:24:40+00:00

Q. How to upgrade the Wireless Camera System?

*Check Original Page: How to upgrade the Wireless Camera System? Online Upgrade 1. Please make sure your camera system is connected to the network, and the Network Status is “Healthy Network”. 2. Right click—System setup—System Admin—System upgrade, choose “Online upgrade” and enable “Upgrade when finish download”--click “Start”. And then the system will automatically upgrade. Offline

Q. How to upgrade the Wireless Camera System?2020-03-26T07:55:36+00:00

Q. How to Match Code the Wireless Camera to connect with NVR?

*Check Original Page: How to Match Code the Wireless Camera to connect with NVR? 1. Please put the camera next to the NVR, and connected the camera to the power supply 2. Please go to "Video Manage" and delete the "IP disconnected" camera from below. 3. Press the camera's reset button for 13-15 seconds (the

Q. How to Match Code the Wireless Camera to connect with NVR?2020-03-26T07:31:38+00:00

Q. Wireless Camera shows “IPC disconnected”, “No video source”, “Connection failed”

*Check Original Page: Wireless Camera shows "IPC disconnected", "No video source", "Connection failed" *Please make sure the wireless camera and NVR are within the valid signal range. Do not install the camera too far from the NVR, otherwise the camera will "Connection failed" or “IPC disconnected” . *Checking the power adapter and antenna, use another

Q. Wireless Camera shows “IPC disconnected”, “No video source”, “Connection failed”2020-07-08T05:49:41+00:00
Go to Top